DP Chemistry: C.2 Fossil fuels

C.2 Fossil fuels

Written specifically for students to provide help and support for the IB Diploma chemistry programme this page provides full coverage of the syllabus content of Option C - sub topic C.2. It encourages you to think critically and provides many questions with full worked answers so that you can monitor and improve your knowledge and understanding.

Learning outcomes

After studying this topic yous should be able to:

Understand:

  • Fossil fuels originate from the reduction of biological compounds that contained carbon, hydrogen, nitrogen, sulfur and oxygen.
  • Crude oil needs to be refined before use. Petroleum consists of a complex mixture of hydrocarbons that can be split into its component parts (fractions) by the physical process of fractional distillation.
  • “Knocking” in a car engine is caused by the tendency of a fuel to auto-ignite. It is related to the molecular structure of the fuel and is measured by the octane number.
  • Cracking and catalytic reforming reactions can be used to enhance the performance of hydrocarbons as fuels.
  • The chemical processes of coal gasification and liquefaction convert coal to gaseous and liquid hydrocarbons.
  • The total amount of greenhouse gases produced during human activities, known as a carbon footprint, is normally expressed in equivalent tons of carbon dioxide.
Apply your knowledge to:
  • Discuss the effect of the chain length and the amount of chain branching on the octane number.
  • Discuss the cracking and reforming reactions of hydrocarbons and explain how the octane number is improved through these processes.
  • Deduce equations for cracking and reforming reactions, and coal gasification and liquefaction reactions.
  • Discuss the advantages and disadvantages of different fossil fuels.
  • Identify the relative volatility and uses of different fractions of petroleum.
  • Calculate the amount of carbon dioxide added to the atmosphere when different fuels burn and determine the carbon footprints for different activities.

Relationships & vocabulary

Nature of science

Fossil fuels have played a key role in the development of science and technology.

International-mindedness

Availability, economic, societal, environmental and technological factors all help to determine which fossil fuels are used by different countries.

Different countries use different fuel rating systems (e.g. RON, MON or PON).

International cooperation and agreement is required over issues concerning ocean drilling, oil pipelines and oil spills.

Vocabulary

crackingreformingisomerizationcyclizationaromatization
knockingauto-ignitionoctane ratingcarbon footprint

Learning slides

You can use this slide gallery for learning or for reviewing concepts and information. It covers all the key points in the syllabus for this sub-topic.

  

Something to think about

Octane rating

In a gasoline (petrol) internal combustion engine the fuel and air mixture is compressed and then ignited by the spark plug. This ignition occurs at the end of the compression stroke so that the pressure produced by the gaseous products forces the piston to move down. Compression alone can cause hydrocarbons to auto-ignite. If that happens before the piston has reached the end its compression stroke then the resulting explosion can cause a knocking sound. This makes the process much less efficient and can also cause serious damage to the engine. The measure of a fuel’s ability to resist auto-ignition is called its octane rating or octane number. The two reference standards used are 2,2,4-trimethylpentane, which is given an octane rating of 100, and heptane, which is assigned an octane rating of zero. Gasoline (petrol) actually exists normally as a complex mixture of hydrocarbons and contains aromatic compounds such as benzene and methylbenzene (toluene) and cycloalkanes as well as straight chain and branched alkanes. The octane number simply refers to how the fuel’s knocking characteristic compare to the reference value. Thus a fuel with an octane rating of 95 will thus have the same knocking characteristic as a mixture of 95% 2,2,4-trimethypentane and 5% heptane by volume.

Octane ratings provide a nice example of International-Mindedness as different scales are used in different countries to rate the octane number. The most commonly used is RON (Research Octane Number), which is measured under controlled condition at a speed of 600 rpm. Another scale, MON (Motor Octane Number) is measured at a speed of 900 rpm. In North America AKI (Anti-Knock Index) is used. This is sometimes also known as PON (Posted Octane Number) and is often written on the pump as (R+M)/2 as it is the average of the RON and MON values.

The ability of a hydrocarbon to resist auto-ignition under compression decreases with increased chain length (pentane has a value of 62, hexane has a value of 25, heptane by definition is zero, and octane has a value of -20,). The octane number increases with increased branching. This can lead to octane ratings greater than 100. Thus 2,2,3-trimethylbutane has an octane rating of 112 (compare this to its isomer heptane with a value of zero). The process of reforming can also lead to higher octane numbers as this results in either increased branching or the formation of aromatic hydrocarbons such as methylbenzene, which have a higher resistance to auto-ignition.

Test your understanding of this topic

(Note that your teacher may have restricted your access to some or all of these questions and worked answers if they are going to use them as a class test or set them as an assignment.)

For ten 'quiz' questions (for quick testing of knowledge and understanding with the answers explained) see MC test: Fossil fuels.

For short-answer questions see  Fossil fuels questions together with the worked answers on a separate page Fossil fuels answers.

More resources

1. A Guardian video giving three good reasons as to why we need to keep fossil fuels in the ground.

  Why we need to keep fossil fuels in the ground

2. A very simple account of the fractions obtained from crude oil and their uses.

  Crude oil fractions and their uses

3. Information on how the cracking and reforming of alkanes can be achieved.

  Distillation, cracking and reforming of hydrocarbons

4. The Green Ninja advises on how to reduce your carbon footprint.

  Green Ninja: Footprint renovation

All materials on this website are for the exclusive use of teachers and students at subscribing schools for the period of their subscription. Any unauthorised copying or posting of materials on other websites is an infringement of our copyright and could result in your account being blocked and legal action being taken against you.