0%

DP IB Physics: HL

Topic Questions

Home / IB / Physics: HL / DP / Topic Questions / 5. Electricity & Magnetism / 5.3 Electric Cells / Multiple Choice


5.3 Electric Cells

Question 1

Marks: 1

Five resistors of equal resistance are connected to a cell as shown. 

5-3-sl-mcq-hard-q1-phy

Which of the following is correct about the power dissipated PXPY and PZ in resistors X, Y and Z respectively? 

  PX PY PZ
A. I squared R 1 third I squared R 2 over 3 I squared R
B. 1 fourth I squared R 1 third I squared R 4 over 9 I squared R
C. I squared R 1 over 9 I squared R 2 over 3 I squared R
D. 1 fourth I squared R 1 over 9 I squared R 4 over 9 I squared R
    Choose your answer
      

    Question 2

    Marks: 1

    Two cells, X and Y, each with internal resistance 1.0 Ω, are connected in a circuit with two resistors as shown. 

    5-3-sl-mcq-hard-q2-phy

    Which of the following statements is not correct? 

    • The circuit charges cell X

    • The power dissipated in cell X is greater than the power dissipated in cell Y

    • The charging current is 3.0 A

    • The circuit charges cell Y

    Choose your answer
      
    Key Concepts
    Electromotive Force

    Question 3

    Marks: 1

    A cell with e.m.f. V0 and negligible internal resistance is connected across a uniform resistance wire of length XY. 

    5-3-sl-mcq-hard-q3-phy

    The flying lead connected at X and is able to connect to XY at any distance r from X. 

    Which expression correctly determines the reading on the voltmeter, V

    • r

    • V subscript 0 r

    • fraction numerator r over denominator X Y end fraction

    • fraction numerator V subscript 0 r over denominator X Y end fraction

    Choose your answer
      

    Question 4

    Marks: 1

    A circuit contains two batteries, an external resistor and a motor, which is attached to a pulley that lifts a load. The direction of current in the circuit is indicated. 

    5-3-sl-mcq-hard-q4-phy

    Which of the following energy transformations most accurately describes the behaviour of the circuit? 

    • chemical → electrical + thermal + mechanical

    • chemical + electrical → mechanical + thermal 

    • chemical → electrical + thermal + mechanical + gravitational 

    • chemical + electrical → thermal + mechanical + gravitational 

    Choose your answer
      

    Question 5

    Marks: 1

    A pump is designed to move water through a certain height h such that the water flows back down, turning a paddle wheel. Such a system is often used to explain the operation of a battery in an electric circuit.

    5-3-sl-mcq-hard-q5-phy

    Which row in the table below best contrasts the work done by the pump and a battery? 

      Pump Battery
    A. Does work on the water flowing in the pump Does work on the current flowing in the wires
    B. Does work on the water flowing in pipes Does work on the current flowing in the wires
    C. Does work on the water flowing in the pump Does work on the ions in the battery
    D. Does work on the water flowing in the pipes Does work on the ions in the battery

      Choose your answer
        

      Question 6

      Marks: 1

      A 24 V solar panel charges a 12 V battery with internal resistance 0.10 Ω. 

      5-3-sl-mcq-hard-q6-phy

      Which of the following is correct? 

        V1 V2
      A. 18 12.6
      B. 30 –12.6
      C. 18 –12.6
      D. 30 12.6
        Choose your answer
          
        Key Concepts
        Internal Resistance

        Question 7

        Marks: 1

        A cell has internal resistance r.

        A graph of terminal potential difference V across the cell against current drawn from the cell I is shown. The scales are such that the length O epsilon is equal to the length O open parentheses epsilon divided by r close parentheses. A point P is chosen on the graph, such that open parentheses O close parentheses open parentheses epsilon divided by 2 close parentheses open parentheses P close parentheses open parentheses epsilon divided by 2 r close parentheses is a square. 

        5-3-sl-mcq-hard-q7-phy

        Which of the following statements is correct? 

        • P is the point at which the load resistance is maximum

        • P is the point at which maximum power is delivered by the cell 

        • P is the point at which minimum power is delivered by the cell

        • P is the point at which the internal resistance of the cell reduces to zero

        Choose your answer
          
        Key Concepts
        Internal Resistance

        Question 8

        Marks: 1

        Which of the following correctly describes the electromotive force of a cell? 

        • The difference in energy between that needed to drive unit charge through the load resistance and through the cell

        • The energy used to drive unit charge through the load resistance

        • The energy used to drive unit charge through the cell's internal resistance

        • The total energy used to drive unit charge round the complete circuit

        Choose your answer
          
        Key Concepts
        Internal Resistance

        Question 9

        Marks: 1

        The figure shows how the e.m.f. of a simple generator varies with time. 

        5-3-sl-mcq-hard-q9-phy

        Which of the following statements is incorrect? 

        • The alternating e.m.f. does not affect the internal resistance of the generator

        • The frequency of the e.m.f. is 200 Hz

        • The internal resistance of the generator alternates with a frequency of 200 Hz 

        • The internal resistance of a power supply depends on its capacity

        Choose your answer
          
        Key Concepts
        Internal Resistance

        Question 10

        Marks: 1

        Two almost identical lead-acid accumulator batteries, X and Y, are connected in a circuit as shown. 

        5-3-sl-mcq-hard-q10-phy

        The following information is provided: 

        • When S1 is closed and S2 remains open, the millivoltmeter reads 60 mV
        • When both S1 and S2 are closed, the reading on the millivoltmeter changes by 20 mV and the ammeter reads 5.0 A

        What is the resistance of R

        • 2.0 mΩ

        • 2.0 Ω

        • 2.0 kΩ

        • 20 kΩ

        Choose your answer