User interface language: English | Español

Date November 2018 Marks available 3 Reference code 18N.3.sl.TZ0.1
Level SL Paper 3 Time zone TZ0
Command term Calculate Question number 1 Adapted from N/A

Question

Alloys containing at least 60 % copper reduce the presence of bacteria on their surface.The percentage of copper in brass, an alloy of copper and zinc, can be determined by UV-vis spectrometry.

A sample of brass is dissolved in concentrated nitric acid and then made up to 250.0 cm3 with water before analysis.

Cu (s) + 4HNO3 (aq) → Cu(NO3)2 (aq) + 2NO2 (g) + 2H2O (l)

3Zn (s) + 8HNO3 (aq) → 3Zn(NO3)2 (aq) + 2NO (g) + 4H2O (l)

The concentration of copper(II) ions in the resulting solution is then determined from a calibration curve, which is plotted by measuring the light absorbance of standard solutions.

Titration is another method for analysing the solution obtained from adding brass to nitric acid.

Outline why the initial reaction should be carried out under a fume hood.

[1]
a.

Deduce the equation for the relationship between absorbance and concentration.

[2]
b.

Outline how a solution of 0.0100 mol dm−3 is obtained from a standard 1.000 mol dm−3 copper(II) sulfate solution, including two essential pieces of glassware you would need.

[3]
c.

The original piece of brass weighed 0.200 g. The absorbance was 0.32.

Calculate, showing your working, the percentage of copper by mass in the brass.

[3]
d.i.

Deduce the appropriate number of significant figures for your answer in (d)(i).

[1]
d.ii.

Comment on the suitability of using brass of this composition for door handles in hospitals.

If you did not obtain an answer to (d)(i), use 70 % but this is not the correct answer.

[1]
e.i.

Suggest another property of brass that makes it suitable for door handles.

[1]
e.ii.

Copper(II) ions are reduced to copper(I) iodide by the addition of potassium iodide solution, releasing iodine that can be titrated with sodium thiosulfate solution, Na2S2O3 (aq). Copper(I) iodide is a white solid.

4I (aq) + 2Cu2+ (aq) → 2CuI (s) + I2 (aq)

I2 (aq) + 2S2O32− (aq) → 2I (aq) + S4O62− (aq)

Deduce the overall equation for the two reactions by combining the two equations.

[2]
f.i.

Suggest why the end point of the titration is difficult to determine, even with the addition of starch to turn the remaining free iodine black.

[1]
f.ii.

Markscheme

NO2/NO/NOx/HNO3/gas is poisonous/toxic/irritant ✔

 

Accept formula or name.

Accept “HNO3 is corrosive” OR “poisonous/toxic gases produced”.

Accept “reaction is harmful/hazardous”.

a.

Slope (gradient):

40 ✔

 

Equation:

absorbance = 40 × concentration

OR

y = 40x

 

Accept any correct relationship for slope such as 1.00 0.025 .

Award [2] if equation in M2 is correct.

b.

dilute 1.00 cm3 «of the standard solution with water» to 100 cm3

OR

dilute sample of standard solution «with water» 100 times ✔

 

«graduated/volumetric» pipette/pipet ✔

volumetric flask ✔

 

Accept any 1 : 100 ratio for M1.

Accept “mix 1 cm3 of the standard solution with 99 cm3 of water” for M1.

Do not accept “add 100 cm3 of water to 1.00 cm3 of standard solution” for M1.

Accept “burette/buret” for M2.

Accept “graduated/measuring flask” for M3 but not “graduated/measuring cylinder” or “conical/Erlenmeyer flask”.

c.

concentration of copper = 0.0080 «mol dm–3» ✔

 

mass of copper in 250.0 cm3 = «0.0080 mol dm–3 × 0.2500 dm3 × 63.55 g mol–1 =» 0.127 «g»

OR

mass of brass in 1 dm3 = «4 × 0.200 g =» 0.800 g AND [Cu2+] = «0.0080 mol dm–3 × 63.55 g mol–1 =» 0.5084 g dm–3

 

«% copper in this sample of brass = 0.127 0.200 × 100 = » 64 «%»

OR

«% copper in this sample of brass = 0.5084 0.800 × 100 = » 64 «%» ✔

 

Accept any value in range 0.0075–0.0085 «mol dm–3» for M1.

Accept annotation on graph for M1.

Award [3] for correct final answer.

Accept “65 «%»”.

d.i.

two ✔

 

Do not apply ECF from 1(d)(i).

d.ii.

«since it is greater than 60%» it will reduce the presence of bacteria «on door handles» ✔

e.i.

resistant to corrosion/oxidation/rusting

OR

low friction surface «so ideal for connected moving components» ✔

 

Accept “hard/durable”, “«high tensile» strength”, “unreactive”, “malleable” or any reference to the appearance/colour of brass (eg “gold-like”, “looks nice” etc.).

Do not accept irrelevant properties, such as “high melting/boiling point”, “non-magnetic”, “good heat/electrical conductor”, “low volatility”, etc.

Do not accept “ductile”.

e.ii.

2I (aq) + 2Cu2+ (aq) + 2S2O32− (aq) → 2CuI (s) + S4O62− (aq)

correct reactants and products ✔

balanced equation ✔

 

M2 can only be awarded if M1 is correct.

f.i.

precipitate/copper(I) iodide/CuI makes colour change difficult to see

OR

release of I2/iodine from starch-I2 complex is slow so titration must be done slowly ✔

f.ii.

Examiners report

[N/A]
a.
[N/A]
b.
[N/A]
c.
[N/A]
d.i.
[N/A]
d.ii.
[N/A]
e.i.
[N/A]
e.ii.
[N/A]
f.i.
[N/A]
f.ii.

Syllabus sections

Core » Topic 11: Measurement and data processing » 11.2 Graphical techniques
Show 54 related questions
Core » Topic 11: Measurement and data processing
Core

View options