Date | May 2017 | Marks available | 2 | Reference code | 17M.3.SL.TZ1.9 |
Level | Standard level | Paper | Paper 3 | Time zone | Time zone 1 |
Command term | Describe | Question number | 9 | Adapted from | N/A |
Question
Usually the size of particles used in biolistics with plant cells is 1000 nm. Researchers tested the effect of using smaller sized particles (40 nm) in the biolistic treatment of animal cells.
The degree of transfection by DNA and the damage to embryonic kidney cells was assessed using particles of the two different sizes. The amount of DNA attached to each particle, whether large or small, was the same.
Describe the effect of the different sized particles on the treatment of these animal cells.
State one other physical method used to introduce DNA into plants.
Markscheme
a. there is little/no significant difference in the success of transfecting DNA
b. there is «significantly» less damage to the cells with the smaller/40nm particles
electroporation / microinjection
Examiners report
Syllabus sections
- 13M.3.SL.TZ1.16c (i): Deduce one reason why there were no more rises in ethanol concentration after 120 hours at 30°.
- 13M.3.SL.TZ2.16e: In 2003, the Integrated Approach to Community Development (IACD) organization introduced the...
- 11M.3.HL.TZ2.7b: Analyse the overall effects of the veratryl alcohol concentration and fermentation time on...
- 11M.3.SL.TZ1.17a: State two roles of microbes in ecosystems.
- 12M.3.HL.TZ2.7c: Explain the changes in concentration of glucose and xylose during phase II.
- 10M.3.HL.TZ1.7c: For an accidental sewage spill, suggest, giving a reason, which of the two microbes may be...
- 16N.3.SL.TZ0.9b: Marker genes are often inserted together with the new gene. State the function of the marker...
- 17M.3.SL.TZ1.8a.i: Biogas production in a fermenter requires a substrate. State another requirement for this...
- 17M.3.SL.TZ2.9: The diagram shows a biofilm that has formed on a tooth. Using the diagram, explain the...
- 17M.3.SL.TZ2.11a: Using this information, outline the reason for Golden rice being considered a transgenic...
- 17N.3.SL.TZ0.08b: Suggest a reason that the fermenter is surrounded by a water jacket.
- 17N.3.SL.TZ0.10d: Explain how quorum sensing benefits the bacteria within the steel pipes.
- 17N.3.HL.TZ0.09b: Suggest a reason for the growth differences between the nontransgenic trout and transgenic...
- 17N.3.HL.TZ0.09c: Describe the use of marker genes in the development of transgenic organisms such as trout.
- 17N.3.HL.TZ0.09d: Outline the possible environmental impact associated with the accidental release of...
- 15M.3.SL.TZ2.16d: Deduce, using the data, whether the genes for quorum sensing and for toxicity of cholera...
- 15M.3.SL.TZ2.16b: Determine the approximate percentage of non-cholera producing strains that produce quorum...
- 10M.3.HL.TZ1.7a: Identify the time at which fecal coliform bacteria counts fell below 1 unit per 100 ml.
- 12N.3.HL.TZ0.7a : State the respiratory activity when the C23O gene ratio first reached its highest level.
- 09N.3.HL.TZ0.8a: Distinguish between the cell walls of Gram-positive and Gram-negative bacteria using the...
- 15N.3.HL.TZ0.7b(i): Compare the outbreaks of food poisoning in 1989 and 1994.
- 13N.3.SL.TZ0.16b: Between 8.5 and 10.5 hours after colonization with the parental bacterial strain,...
- 13N.3.SL.TZ0.16c: Using the data in the graph, distinguish between luminescence in squid colonized by the...
- 16M.3.HL.TZ0.10b: State two environmental benefits from the use of genetically modified glyphosate resistant...
- 16N.3.SL.TZ0.8d: State two uses of the citric acid produced.
- 16N.3.HL.TZ0.10b: State how the sequence of the target gene from the fungus could be identified using a...
- 16N.3.HL.TZ0.13: Explain the formation of biofilms and the problems associated with their formation.
- 17M.3.SL.TZ2.10b: State one advantage of potatoes with a high amylopectin content.
- 17M.3.SL.TZ1.12: Discuss the environmental risks of the cultivation of genetically modified crops.
- 17M.3.HL.TZ2.10c: With respect to the degradation of cyanide by P. fluorescens, explain what is meant by...
- 17N.3.SL.TZ0.09a: State the role of a vector in biotechnology.
- 17N.3.HL.TZ0.12b: Temperature is a variable that needs to be continually monitored in deep-tank batch...
- 15M.3.SL.TZ2.16c: Compare the percentage of strains that do not produce quorum sensing proteins (QS – ) in...
- 15M.3.SL.TZ2.16a: State the percentage of cholera producing strains that do not produce quorum sensing proteins...
- 13M.3.HL.TZ2.7c: Discuss whether 80°C is the best temperature to operate the chulli purifier.
- 11M.3.HL.TZ2.7c: Suggest two other conditions that might affect the production of laccases.
- 11M.3.SL.TZ2.16c: Deduce from the graph the optimal conditions for maximizing the biotechnological production...
- 12M.3.HL.TZ1.8b: The diagram below represents the cell walls of two different bacteria. State, with a reason,...
- 12M.3.HL.TZ2.7b: Distinguish between the changes in concentration of xylose and arabinose in phase II.
- 12M.3.HL.TZ2.8a: State, giving one specific example, how individual bacteria change their characteristics when...
- 12M.3.SL.TZ1.16b: Compare the effect of the 80°C heat treatment on coliphages and S. choleraesuis.
- 12N.3.HL.TZ0.7e: Scientists are interested in inserting the C23O genes into bacteria to clean up oil spills in...
- 09N.3.SL.TZ0.18a: State two fuels that can be produced from biomass using microbes.
- 15M.3.HL.TZ2.9: Describe the consequences of releasing raw sewage into rivers.
- 15N.3.HL.TZ0.7a: State the number of years during the study when contaminated dairy products caused food...
- 15N.3.HL.TZ0.7b(ii): Suggest two reasons for these changes.
- 15N.3.HL.TZ0.8a: State one example of a bacterium that forms aggregates.
- 13N.3.SL.TZ0.16a: State the mean luminescence per squid 11.5 hours after colonization by parental V. fischeri.
- 16M.3.SL.TZ0.9a: State the general term for the reaction, involving microorganisms, that takes place in the...
- 16N.3.SL.TZ0.10a: Outline the emergent properties of biofilms.
- 16N.3.HL.TZ0.9c: Predict the results obtained with disc 1 in a Gram-positive bacterial lawn.
- 17M.3.SL.TZ1.11b: State the genus of halophilic bacteria in the soil that could be degrading the benzene.
- 17M.3.SL.TZ1.11a: Determine the optimum concentration of sodium chloride for benzene degradation.
- 17M.3.HL.TZ1.8c: Distinguish between the structure of Gram-positive and Gram-negative bacteria.
- 17N.3.SL.TZ0.09b: Explain how the Hepatitis B vaccine is produced using TMV.
- 17N.3.SL.TZ0.08a: State two conditions in the fermenter that would be monitored by the probes.
- 17N.3.SL.TZ0.09c: State the importance of marker genes in genetic modification.
- 17N.3.HL.TZ0.09a: Analyse the data for the growth of nontransgenic trout and transgenic trout.
- 17N.3.HL.TZ0.11c: Suggest two problems that could be caused by the presence of biofilms in water systems.
- 17N.3.HL.TZ0.12a: Beans contribute to flatulence. Alpha-galactosidase, derived from the fungus Aspergillus...
- 13M.3.HL.TZ2.7d: The results suggest that there may be a relationship between the water flow rate and the...
- 13M.3.SL.TZ1.16b: State the effect of increasing temperature from 20°C to 30 °C on the rate of production of...
- 13M.3.HL.TZ2.8b: Outline how bacteria can be classified by Gram staining.
- 11M.3.SL.TZ2.16a (ii): Identify the amount of laccases produced when the veratryl alcohol concentration is at its...
- 12M.3.SL.TZ1.15a: State which indicator was more resistant to the heat treatment.
- 09M.1.SL.TZ2.25: Which enzymes are needed to incorporate genes into plasmids to create recombinant...
- 11N.3.HL.TZ0.7b: Calculate the difference in cadmium ion uptake between pH 4 and pH 5 at 60...
- 10N.3.SL.TZ0.18b: Explain the consequences of releasing raw sewage into rivers and the involvement of...
- 10N.3.HL.TZ0.9: Explain the use of bacteria in the bioremediation of water.
- 13N.3.SL.TZ0.17b: Outline the role of saprotrophic bacteria in the treatment of sewage.
- 16M.3.SL.TZ0.10a: Before planting their crops, farmers have traditionally plowed their land to suppress weed...
- 16N.3.SL.TZ0.8b: Suggest a reason that fermentation is most successful at 30°C.
- 17M.3.SL.TZ2.10a: Discuss the hypothesis that the temperature at which starches form a gel depends on the...
- 17M.3.SL.TZ2.10c: The Amflora potato was approved for industrial applications in the European Union (EU) in...
- 17M.3.HL.TZ2.11: Outline one example of the use of a marker gene in genetic engineering.
- 17M.3.HL.TZ2.10b: Suggest how the addition of sucrose promotes the degradation of cyanide.
- 17M.3.HL.TZ1.9a: Outline how open reading frames are identified in DNA.
- 17M.3.HL.TZ1.9c: There are several methods of introducing DNA into a cell in the laboratory. Outline the...
- 17M.3.HL.TZ2.13a: The following base sequence represents part of a larger DNA molecule that is going to be...
- 17M.3.HL.TZ2.13c: Once an open reading frame is identified, explain the steps researchers would follow to...
- 17N.3.SL.TZ0.11: The picture shows workers cleaning up a polluted stretch of coastline in Alaska after oil was...
- 17N.3.SL.TZ0.08d: Explain the process of penicillin production in the fermenter.
- 17N.3.HL.TZ0.11b: State a positive application of biofilms.
- 259337: This is an example question for the example test. You can delete this question.
- 15M.3.SL.TZ2.16e: Vibrio cholerae is Gram-negative. Describe the structure of the cell wall of this bacterium.
- 15M.3.HL.TZ1.8a (ii): List two roles for microbes in ecosystems.
- 13M.3.HL.TZ1.9: Explain how bacteria are used in bioremediation of soil.
- 13M.3.SL.TZ1.16d: Discuss the idea of producing wine using a lower temperature range to avoid economic losses...
- 12M.3.HL.TZ2.7d: Suggest an advantage of the use of wheat straw as a source of energy.
- 11N.3.HL.TZ0.8a (i): The electron micrograph below shows a thin section of the Gram-positive bacterium Micrococcus...
- 12N.3.HL.TZ0.7b: Describe the respiratory activity as the soil treatment progresses.
- 16M.3.SL.TZ0.10c: Outline what is meant by open reading frame (ORF).
- 16M.3.SL.TZ0.11a: List two properties of biofilms.
- 16M.3.SL.TZ0.9c: State the binomial name of an organism used in continuous culturing to produce citric acid...
- 16M.3.HL.TZ0.10a: (i) Outline the pattern of change in resistant populations of ryegrass over time in...
- 16M.3.HL.TZ0.11a: Suggest one way in which organisms such as Paenibacillus metabolize toxic substances.
- 16N.3.SL.TZ0.8c: Suggest reasons for the changes in mass of sugar and citric acid after day 6.
- 16N.3.HL.TZ0.10a: Outline the use of kanamycin in the selection of transgenic cotyledons.
- 17M.3.SL.TZ1.8b: Outline the principles of fermentation by continuous culture.
- 17M.3.SL.TZ2.11b: Outline the bioinformatics method used to identify the target gene in the plant.
- 17M.3.SL.TZ1.16a: Calculate the diversity of site C. Working should be shown.
- 17M.3.HL.TZ2.10a: Outline the evidence that P. fluorescens can degrade the cyanide.
- 17N.3.SL.TZ0.10b: Suggest why membrane filtration may be more suitable than chlorination in purifying the water.
- 17N.3.SL.TZ0.10a: State the effect chlorination has on the accumulation of biofilm in the pipe.
- 13M.3.HL.TZ1.7c: Compare the effect of Cr3+ and S2– on the inhibition of BPT3.
- 13M.3.HL.TZ2.7e: Evaluate pasteurization as a method of controlling microbial growth.
- 13M.3.HL.TZ2.9: Explain how methane can be generated from biomass.
- 13M.3.HL.TZ2.7b: Calculate the maximum volume of safe drinking water that could be produced by the chulli...
- 13M.3.HL.TZ2.7a: State the highest temperature at which bacteria were found in water that had passed through...
- 13M.3.SL.TZ2.17b: Explain how Gram staining is used in microbiology.
- 11M.3.HL.TZ1.8d: Explain the use of bacteria in bioremediation.
- 11M.3.SL.TZ2.16a (i): Identify the amount of laccases produced when the veratryl alcohol concentration is at its...
- 12M.3.HL.TZ2.7a: State the maximum concentration of glucose reached during the two phases, giving the units.
- 12M.3.SL.TZ1.16c: Discuss whether the heat treatment should be continued beyond 60 minutes if this technique...
- 12M.3.SL.TZ1.16d: In many areas, sewage is discharged directly into the environment. State two potential...
- 11N.3.HL.TZ0.7a: Describe the cadmium ion uptake by A. fumigatus at pH 6.
- 10N.3.SL.TZ0.17b: Label the parts of the cell walls in Gram-positive Eubacteria and Gram-negative Eubacteria...
- 09N.3.SL.TZ0.17a: Identify the type of pathogen shown in the electron micrograph, giving reasons for your answer.
- 15N.3.HL.TZ0.8d: The image shows part of a sewage treatment plant. Outline the role of bacteria in...
- 16M.3.SL.TZ0.9b: Other than temperature and pH, state one variable that should be monitored during continuous...
- 16M.3.SL.TZ0.12: Explain, with reference to one example, how a polluted ecosystem can be restored through...
- 16M.3.HL.TZ0.9a: Using the diagram, suggest a reason for high concentrations of NADH favouring the production...
- 16M.3.HL.TZ0.9b: Predict one metabolite other than succinate that will be produced in greater amounts if the...
- 17M.3.HL.TZ1.10a: Biofilms can be formed in many different environments. State one example of an environment...
- 17M.3.HL.TZ1.10a.ii: Discuss the emergent properties of biofilms.
- 17M.3.SL.TZ1.10b: Outline the importance of avoiding biofilm formation in pipes carrying drinking water.
- 17M.3.SL.TZ1.9b: State one other physical method used to introduce DNA into plants.
- 17M.3.SL.TZ1.8a.ii: Suggest reasons based on the data in the graph for increases in biogas production at Svensk...
- 17N.3.HL.TZ0.11a: Outline the emergent properties of biofilms.
- 15M.3.SL.TZ2.18b: Explain the production of methane from biomass.
- 13M.3.HL.TZ1.7d: Raw sewage contains high level of nitrates. Explain the importance of denitrification of raw...
- 11M.3.HL.TZ1.8a: Outline the diversity of Eubacteria according to cell wall structure.
- 11M.3.HL.TZ2.7a (i): Identify the amount of laccases produced when the veratryl alcohol concentration is at its...
- 11M.3.HL.TZ2.7a (ii): Identify the amount of laccases produced when the veratryl alcohol concentration is at its...
- 12M.3.HL.TZ1.8c: Microorganisms play many roles in ecosystems. List two of these roles. 1. ...
- 12N.3.HL.TZ0.7c: The data in the graph indicates that hydrocarbon degradation occurred during the first 30...
- 15N.3.HL.TZ0.7c: Explain how pasteurization may have prevented food poisoning by dairy products.
- 16M.3.SL.TZ0.11b: Distinguish between the data for shower head biofilms and municipal water sources.
- 16M.3.SL.TZ0.10b: Explain the role of bioinformatics in the determination of the function of an unknown target...
- 16M.3.HL.TZ0.10c: Explain the role of the Agrobacterium tumefaciens Ti plasmid in genetic modification.
- 16M.3.HL.TZ0.11b: The decontamination system for the removal of the dye uses a surface to which Paenibacillus...
- 16N.3.HL.TZ0.10c: Suggest whether the results of this experiment show that these transgenic tomato plants are...
- 16N.3.SL.TZ0.9c: Outline the characteristics of an open reading frame.
- 16N.3.HL.TZ0.9b: Outline the effect of mutating the LpxC inhibitor.
- 17M.2.HL.TZ1.1f.ii: Suggest a reason for the greater expression of the gene for the urea transporter after an...
- 17M.3.SL.TZ1.10a: Evaluate the effect of 1 % ginger root extract on biofilm formation.
- 17M.3.HL.TZ2.13b: State the type of codon that helps to identify open reading frames.
- 17M.3.HL.TZ2.9c: Distinguish between batch fermentation and continuous fermentation.
- 13M.3.HL.TZ1.7a: Predict the Cr3+ concentration that would cause 50% inhibition in BPT3.
- 13M.3.HL.TZ1.7b: Waste water from some industrial processes contains high levels of Cr3+. State, with a...
- 13M.3.SL.TZ1.16a: State the concentration of glucose at 20°C after 110 hours of incubation, giving the units.
- 13M.3.SL.TZ1.16c (ii): Deduce one reason why the concentration of ethanol and acetic acid at 35°C does not rise...
- 11M.3.SL.TZ2.16b: Analyse the overall effects of the veratryl alcohol concentration and fermentation time on...
- 11N.3.HL.TZ0.8b: Outline the role of saprotrophic bacteria in the treatment of sewage using reed bed systems.
- 12N.3.SL.TZ0.18b (i): Outline the role of saprotrophic bacteria in the treatment of sewage.
- 13N.3.SL.TZ0.16d: Bioluminescence only happens when V. fischeri becomes part of a population with high density,...
- 16M.3.SL.TZ0.10d: Genetic engineers sometimes use physical methods to transform cells. Describe the method of...
- 16M.3.SL.TZ0.11c: Suggest reasons for biofilms developing inside shower heads.
- 16N.3.SL.TZ0.10b: Explain two ways in which bacteria of the genus Pseudomonas can be used for bioremediation.
- 16N.3.SL.TZ0.8a: State a suitable fungus for the production of citric acid in the fermenter.
- 16M.3.HL.TZ0.11c: Outline another named example of a microorganism used in bioremediation.
- 16N.3.SL.TZ0.9d: Explain, using an example, how gene transfer to a plant could help increase crop yield.
- 16N.3.HL.TZ0.9a: Outline the effect of disc 3 on the bacterial lawn.
- 17M.3.SL.TZ2.13: Explain how microorganisms can be used in response to pollution incidents such as an oil spill.
- 17M.3.HL.TZ2.9d: Aspergillus niger is used to produce citric acid by continuous fermentation. Glucose is...
- 17N.3.SL.TZ0.08c: Identify the waste gas produced.
- 17N.3.SL.TZ0.10c: Identify which two pipes would be required to study the effect of heat on biofilm accumulation.