| Date | November 2018 | Marks available | 1 | Reference code | 18N.1.SL.TZ0.6 |
| Level | SL | Paper | 1 | Time zone | no time zone |
| Command term | Question number | 6 | Adapted from | N/A |
Question
What are the disadvantages of carrying out a life cycle analysis (LCA)?
I. Time consuming
II. Expensive
III. Legally binding
A. I and II
B. I and III
C. II and III
D. I, II and III
Markscheme
A
Examiners report
Syllabus sections
-
18N.1.HL.TZ0.8:
Designers need to know which materials for a particular product would be most sustainable.
Which of the following would help a designer achieve this task?
A. UNEP eco design manual
B. Design for environment software
C. Environmental impact assessment matrix
D. Finite element analysis (FEA)
-
20N.1.HL.TZ0.6:
Which of the following statements are true of life cycle analysis (LCA)?
I. Straightforward
II. Expensive
III. Time-consuming
A. I and II only
B. I and III only
C. II and III only
D. I, II and III
-
19N.1.SL.TZ0.7:
Which of the following are considered when carrying out a life cycle analysis (LCA)?
I. Utilization
II. Disposal
III. Amount of labour
A. I and II
B. I and III
C. II and III
D. I, II and III
-
22M.2.SL.TZ0.1b.ii:
List two reasons why some countries recycle a larger percentage of plastics than others.
-
22M.2.SL.TZ0.6d:
Life cycle analysis (LCA) is a tool that assesses the impact of a product on the environment.
Explain how the environmental impact can be minimized during production, distribution and disposal of the electric motorcycle.
- 17N.1.SL.TZ0.9: At what stage in the life cycle of a product will a manufacturer have the least...
- 19M.1.HL.TZ0.7: Cradle to grave is a linear economy based on the make, use, dispose model. What model is...
-
21N.2.SL.TZ0.5b:
Explain one way how disposable products can have a negative impact on the environment.
-
20N.2.SL.TZ0.1d.i:
List one reason why the design for environment software does not generate a result for energy consumed at the utilization stage of the product lifecycle.
- 19N.1.SL.TZ0.5: Internet-ready televisions allow access to a number of services including film and television...
-
19N.1.HL.TZ0.8:
Which eco-design system gives a low, medium or high risk rating for each stage of a life cycle analysis (LCA)?
A. Product life cycle
B. Converging technology
C. Environmental impact assessment matrix
D. United Nations Environmental Programme Manual
-
20N.1.SL.TZ0.4:
Figure 1 is an example of a tool used by designers.
Figure 1: A tool used to demonstrate the stages and impacts of a project
[Source: © International Baccalaureate Organization 2020.]
What is Figure 1 an example of?
A. Life cycle analysis (LCA) matrix
B. Design for the environment software
C. Affinity diagramming
D. Environmental impact assessment matrix
-
20N.2.SL.TZ0.1e.i:
Outline why the energy consumed at the pre-production stage is greater for aluminium than for ABS.
- 19M.1.SL.TZ0.6: Which three categories are focussed on in eco-design? A. Materials, energy and...
-
21N.2.SL.TZ0.5c:
Explain two ways how the design team have addressed the problem of disposability through the design of the Aria asthma inhaler.
-
21N.2.SL.TZ0.5d:
Rogers’ characteristics of innovation impact on the rate of consumer adoption of an innovation.
Explain the role of relative advantage, compatibility and observability on the rate of adoption of the Aria asthma inhaler.
-
21N.2.SL.TZ0.6d:
Explain how the use of nano cellulose impacts the pre-production, utilization and disposal stages of the NCV’s life cycle.
-
19M.2.SL.TZ0.7b:
Explain one reason why the smartwatch is an example of a converging technology.
