IB Questionbank

User interface language: English | Español

Date	May 2017	Marks available	1	Reference code	17M.3.SL.TZ1.5
Level	Standard level	Paper	Paper 3	Time zone	1
Command term	Write down	Question number	5	Adapted from	N/A

Question

A horizontal rigid bar of length 2R is pivoted at its centre. The bar is free to rotate in a horizontal plane about a vertical axis through the pivot. A point particle of mass M is attached to one end of the bar and a container is attached to the other end of the bar.

A point particle of mass $\frac{M}{3}$ moving with speed v at right angles to the rod collides with the container and gets stuck in the container. The system then starts to rotate about the vertical axis.

The mass of the rod and the container can be neglected.

A torque of 0.010 N m brings the system to rest after a number of revolutions. For this case R = 0.50 m, M = 0.70 kg and v = 2.1 m s^–1.

Write down an expression, in terms of M, v and R, for the angular momentum of the system about the vertical axis just before the collision.

[1]

a.i.

Just after the collision the system begins to rotate about the vertical axis with angular velocity ω. Show that the angular momentum of the system is equal to $\frac{4}{3}M{R^2}\omega$ .

[1]

a.ii.

Hence, show that $\omega = \frac{v}{{4R}}$ .

[1]

a.iii.

Determine in terms of M and v the energy lost during the collision.

[3]

a.iv.

Show that the angular deceleration of the system is 0.043 rad $\,$ s^–2.

[1]

b.i.

Calculate the number of revolutions made by the system before it comes to rest.

[3]

b.ii.

Markscheme

$\frac{M}{3}vR$

[1 mark]

a.i.

evidence of use of: $L = I\omega = \left( {M{R^2} + \frac{M}{3}{R^2}} \right)\omega$

[1 mark]

a.ii.

evidence of use of conservation of angular momentum, $\frac{{MvR}}{3} = \frac{4}{3}M{R^2}\omega$

«rearranging to get $\omega = \frac{v}{{4R}}$ »

[1 mark]

a.iii.

initial KE = $\frac{{M{v^2}}}{6}$

final KE = $\frac{{M{v^2}}}{{24}}$

energy loss = $\frac{{M{v^2}}}{8}$

[3 marks]

a.iv.

$\alpha$ «= $\frac{3}{4}\frac{\Gamma }{{M{R^2}}}$ » = $\frac{3}{4}\frac{{0.01}}{{0.7 \times {{0.5}^2}}}$

«to give $\alpha$ = 0.04286 rad $\,$ s⁻²»

Working OR answer to at least 3 SF must be shown

[1 mark]

b.i.

$\theta = \frac{{\omega _i^2}}{{2\alpha }}$ «from $\omega _f^2 = \omega _i^2 + 2\alpha \theta$ »

$\theta$ « $= \frac{{{v^2}}}{{32{R^2}\alpha }} = \frac{{{{2.1}^2}}}{{32 \times {{0.5}^2} \times 0.043}}$ » = 12.8 OR 12.9 «rad»

number of rotations «= $\frac{{12.9}}{{2\pi }}$ » = 2.0 revolutions

[3 marks]

b.ii.

Examiners report

[N/A]

a.i.

[N/A]

a.ii.

[N/A]

a.iii.

[N/A]

a.iv.

[N/A]

b.i.

[N/A]

b.ii.

Syllabus sections

Option B: Engineering physics » Option B: Engineering physics (Core topics) » B.1 – Rigid bodies and rotational dynamics

Show 52 related questions

17M.3.SL.TZ2.6c.i:
Determine the final angular speed of the probe–satellite system.
18M.3.SL.TZ1.6d.i:
Explain why the angular speed will increase.
16N.3.SL.TZ0.9: The diagram shows two methods of pedalling a bicycle using a force F. In method 1 the...
18M.3.SL.TZ2.6a.iii:
Determine the angular velocity of the wheel at B.
18M.3.SL.TZ2.6b.ii:
Describe the effect of F on the angular speed of the wheel.
18N.3.SL.TZ0.6b.ii:
After time t the rod makes an angle θ with the horizontal. Outline why the equation $\theta = \frac{1}{2}\alpha {t^2}$ cannot be used to find the time it takes θ to become $\frac{\pi }{2}$ (that is for the rod to become vertical for the first time).
18N.3.SL.TZ0.6c.ii: At the instant the rod becomes vertical calculate the angular momentum of the rod.
18N.3.SL.TZ0.6a: Calculate the force the support exerts on the rod.
18M.3.SL.TZ2.6a.ii:
In moving from point A to point B, the centre of mass of the wheel falls through a vertical distance of 0.36 m. Show that the translational speed of the wheel is about 1 m s^–1 after its displacement.
17N.3.SL.TZ0.7c: Calculate the acceleration of the hoop when θ = 20°. Assume that the hoop continues to roll...
18M.3.SL.TZ1.6b.ii:
Calculate, for the merry-go-round after one revolution, the angular momentum.
17M.3.SL.TZ2.6a.i:
Deduce the linear acceleration of the centre of mass of the probe.
16N.3.SL.TZ0.8a:
The velocity of the falling object is 1.89 m s^–1 at 3.98 s. Calculate the average angular acceleration of the flywheel.
18N.3.SL.TZ0.6c.i:
At the instant the rod becomes vertical show that the angular speed is ω = 2.43 rad s^–1.
18N.3.SL.TZ0.6b.i:
Calculate, in rad s^–2, the initial angular acceleration $\alpha$ of the rod.
17N.3.SL.TZ0.6a: Explain what is meant by proper length.
17N.3.SL.TZ0.7a: On the diagram, draw and label the forces acting on the hoop.
19N.3.SL.TZ0.5b(ii): Show that the angular velocity of the flywheel at t = 5.00 s is 200 rad s–1.
19N.3.SL.TZ0.5a: State the torque provided by the force W about the axis of the flywheel.
19N.3.SL.TZ0.5b(iii):
Calculate the maximum tension in the string.
19N.3.SL.TZ0.5c(i): The flywheel is in translational equilibrium. Distinguish between translational equilibrium...
19N.3.SL.TZ0.5b(i): Identify the physical quantity represented by the area under the graph.
17N.3.SL.TZ0.7d:
State the relationship between the force of friction and the angle of the incline.
16N.3.SL.TZ0.8b:
Show that the torque acting on the flywheel is about 0.3 Nm.
17M.3.SL.TZ1.5b.ii:
Calculate the number of revolutions made by the system before it comes to rest.
18M.3.SL.TZ2.6a.i:
The moment of inertia of the wheel is 1.3 × 10^–4 kg m². Outline what is meant by the moment of inertia.
18M.3.SL.TZ1.6c:
Calculate the new angular speed of the rotating system.
19M.3.SL.TZ2.8b:
Calculate F.
18M.3.SL.TZ1.6b.i:
Calculate, for the merry-go-round after one revolution, the angular speed.
20N.3.SL.TZ0.6a:
Show that the final angular velocity of the bar is about $3 rad s^{- 1}$ .
16N.3.SL.TZ0.8c:
(i) Calculate the tension in the string.

(ii) Determine the mass m of the falling object.
17N.3.SL.TZ0.7e:
The angle of the incline is slowly increased from zero. Determine the angle, in terms of the coefficient of friction, at which the hoop will begin to slip.
19N.3.SL.TZ0.5c(ii):
At t = 5.00 s the flywheel is spinning with angular velocity 200 rad s^–1. The support bearings exert a constant frictional torque on the axle. The flywheel comes to rest after 8.00 × 10³ revolutions. Calculate the magnitude of the frictional torque exerted on the flywheel.
19M.3.SL.TZ2.9a:
Show that the total kinetic energy E_k of the sphere when it rolls, without slipping, at speed v is ${E_{\text{K}}} = \frac{7}{{10}}m{v^2}$ .
20N.3.SL.TZ0.6d:
The torque is removed. The bar comes to rest in $30$ complete rotations with constant angular deceleration. Determine the time taken for the bar to come to rest.
20N.3.SL.TZ0.6b:
Draw the variation with time $t$ of the angular displacement $θ$ of the bar during the acceleration.
20N.3.SL.TZ0.7b: Explain the changes to the rotational kinetic energy in the person-turntable system.
20N.3.SL.TZ0.7a:
Explain the direction in which the person-turntable system starts to rotate.
20N.3.SL.TZ0.6c:
Calculate the torque acting on the bar while it is accelerating.
20N.3.SL.TZ0.8:
A solid sphere of radius $r$ and mass $m$ is released from rest and rolls down a slope, without slipping. The vertical height of the slope is $h$ . The moment of inertia $I$ of this sphere about an axis through its centre is $\frac{2}{5} m r^{2}$ .

Show that the linear velocity $v$ of the sphere as it leaves the slope is $\sqrt{\frac{10 g h}{7}}$ .
17M.3.SL.TZ2.6b:
The forces act for 2.00 s. Show that the final angular speed of the probe is about 16 rad $\,$ s^–1.
17N.3.SL.TZ0.7b:
Show that the linear acceleration a of the hoop is given by the equation shown.

a = $\frac{{g \times \sin q}}{2}$
18M.3.SL.TZ1.6d.ii:
Calculate the work done by the child in moving from the edge to the centre.
19M.3.SL.TZ2.8a: Outline why the normal force acting on the ladder at the point of contact with the wall is...
17M.3.SL.TZ1.5a.ii:
Just after the collision the system begins to rotate about the vertical axis with angular velocity ω. Show that the angular momentum of the system is equal to $\frac{4}{3}M{R^2}\omega$ .
17M.3.SL.TZ1.5a.iii:
Hence, show that $\omega = \frac{v}{{4R}}$ .
17M.3.SL.TZ1.5b.i:
Show that the angular deceleration of the system is 0.043 rad $\,$ s^–2.
17M.3.SL.TZ2.6a.ii:
Calculate the resultant torque about the axis of the probe.
17M.3.SL.TZ1.5a.iv:
Determine in terms of M and v the energy lost during the collision.
17M.3.SL.TZ2.6c.ii:
Calculate the loss of rotational kinetic energy due to the linking of the probe with the satellite.
18M.3.SL.TZ1.6a:
Show that the angular acceleration of the merry-go-round is 0.2 rad s^–2.
19M.3.SL.TZ2.9b:
A solid sphere of mass 1.5 kg is rolling, without slipping, on a horizontal surface with a speed of 0.50 m s^-1. The sphere then rolls, without slipping, down a ramp to reach a horizontal surface that is 45 cm lower.

Calculate the speed of the sphere at the bottom of the ramp.

Hide related questions

Option B: Engineering physics » Option B: Engineering physics (Core topics)

Option B: Engineering physics

Question

Markscheme

Examiners report

Syllabus sections

View options