IB Questionbank

Updates to Questionbank

User interface language: English | Español

Date	May 2018	Marks available	2	Reference code	18M.3.SL.TZ1.8
Level	Standard level	Paper	Paper 3	Time zone	Time zone 1
Command term	Explain	Question number	8	Adapted from	N/A

Question

Citric acid is produced industrially from sugars in continuous fermenters using the fungus Aspergillus niger and with date syrup as a growth medium. Citric acid is a byproduct of the metabolism of this fungus. The fungus requires a nitrogen source for optimal growth and the impact of different nitrogen sources on citric acid production was investigated. The control received no additional nitrogen.

Identify the nitrogen source that results in the highest yield of citric acid.

[1]

a.

State two uses for industrially produced citric acid.

[1]

b.

Citric acid can be produced by either batch fermentation or continuous fermentation. Distinguish between these two methods.

[2]

c.

Explain the significance of pathway engineering in the industrial use of microorganisms.

[2]

d.

Markscheme

NH₄NO₃ / ammonium nitrate

a.

food preservative, flavouring, (stabilizer) in alcohol production

Two answers for 1 mark.

b.

Answer does not need to be in a table.

c.

a. used to produce specific metabolites/chemicals/substances

b. used to create/maintain optimum conditions for microorganism growth/maximum yield

c. remove by-products / block competing pathways

d. introduce new genes that increase efficiency/yield

d.

Examiners report

[N/A]

a.

[N/A]

b.

[N/A]

c.

[N/A]

d.

Syllabus sections

Option B: Biotechnology and bioinformatics » Option B: Biotechnology and bioinformatics (Core topics) » B.1 Microbiology: organisms in industry

Show 65 related questions

17M.3.HL.TZ2.9d: Aspergillus niger is used to produce citric acid by continuous fermentation. Glucose is...
18M.3.SL.TZ1.8c: Citric acid can be produced by either batch fermentation or continuous fermentation....
18N.3.HL.TZ0.10d: State the main component of biogas.
17N.3.SL.TZ0.08a:
State two conditions in the fermenter that would be monitored by the probes.
17M.3.SL.TZ1.16a: Calculate the diversity of site C. Working should be shown.
17N.3.HL.TZ0.12b: Temperature is a variable that needs to be continually monitored in deep-tank batch...
18M.3.SL.TZ2.8a.i: A. aceti is a Gram-negative bacterium. If a Gram staining procedure were carried out on a...
18M.3.SL.TZ2.8b.iii: Distinguish between batch fermentation and continuous fermentation.
18M.3.SL.TZ2.8b.ii: Describe one way in which microorganisms in this fermenter could be limited by their own...
18M.3.HL.TZ2.10c: Escherichia coli, a Gram-negative bacterium, is a common cause of urinary tract infections....
18M.3.SL.TZ1.8a: Identify the nitrogen source that results in the highest yield of citric acid.
18N.3.HL.TZ0.10b: Deduce, with a reason, whether X is a continuous fermenter or a batch fermenter.
18M.3.HL.TZ1.9c: The diagram represents the cell walls of Gram-positive and Gram-negative bacteria. Label...
20N.3.SL.TZ0.8b: Describe how optimal temperature is maintained inside the fermenter.
19M.3.HL.TZ1.9a.iii:
Suggest a reason for the result with disc X.
16N.3.SL.TZ0.8b: Suggest a reason that fermentation is most successful at 30°C.
17N.3.SL.TZ0.08b:
Suggest a reason that the fermenter is surrounded by a water jacket.
17N.3.SL.TZ0.08d:
Explain the process of penicillin production in the fermenter.
19N.3.HL.TZ0.10b: Identify the ideal temperature and oxygen conditions inside the fermenter for efficient...
18N.3.HL.TZ0.10e: Inside Y there are rotating paddles. Outline two reasons for these paddles being needed.
18N.3.HL.TZ0.10a: State a group of organisms that will be active in the fermenter labelled X.
19M.3.HL.TZ2.9a.i: State one industrial use of citric acid.
19M.3.HL.TZ2.9a.ii:
State the scientific name (binomial) of the microorganism usually used in this process.
18N.3.HL.TZ0.10c: Probes are used to monitor significant variables within the fermenter. List three significant...
17M.3.HL.TZ2.9c: Distinguish between batch fermentation and continuous fermentation.
17M.3.SL.TZ1.8b: Outline the principles of fermentation by continuous culture.
17M.3.HL.TZ1.8c: Distinguish between the structure of Gram-positive and Gram-negative bacteria.
16N.3.HL.TZ0.9b: Outline the effect of mutating the LpxC inhibitor.
16N.3.SL.TZ0.8a: State a suitable fungus for the production of citric acid in the fermenter.
17N.3.SL.TZ0.08c: Identify the waste gas produced.
18M.3.SL.TZ2.8b.i: List two abiotic variables that would need to be monitored during this fermentation process.
16N.3.SL.TZ0.8d: State two uses of the citric acid produced.
19N.3.SL.TZ0.8b: Identify the ideal temperature and oxygen conditions inside the fermenter for efficient...
19N.3.SL.TZ0.8c: Distinguish between batch and continuous culture fermentation.
19N.3.HL.TZ0.10a: Suggest one material that could be loaded into the biogas fermenter from which biogas can be...
19N.3.HL.TZ0.10c: Distinguish between batch and continuous culture fermentation.
16N.3.HL.TZ0.9c: Predict the results obtained with disc 1 in a Gram-positive bacterial lawn.
20N.3.HL.TZ0.10a.i: State in which numbered part of the process you would find the probes to detect changes in pH.
20N.3.SL.TZ0.8a: Outline a reason for inserting steam into the fermenter before fermentation.
19N.3.SL.TZ0.8a: Suggest one material that could be loaded into the biogas fermenter from which biogas can be...
19M.3.SL.TZ1.8b: E. coli and P. aeruginosa are both Gram-negative bacteria and S. aureus is Gram-positive....
19M.3.HL.TZ1.9a.ii: Distinguish between the action of tetracycline and penicillin on B. subtilis.
20N.3.HL.TZ0.10c: State one use of the citric acid produced.
20N.3.SL.TZ0.8c:
Explain how penicillin can be produced in a fermenter.
19M.3.HL.TZ1.9b: Explain how it could be determined that B. subtilis is a Gram-positive bacterium.
19M.3.SL.TZ2.8c:
Suggest one reason for the higher methane content in biogas in pre-treated rice straw waste.
19M.3.SL.TZ2.8b:
Using the graph, explain the trend in biogas production over time in the fermenter without pre-treatment.
17M.2.HL.TZ1.1f.ii: Suggest a reason for the greater expression of the gene for the urea transporter after an...
17N.3.HL.TZ0.12a:
Beans contribute to flatulence. Alpha-galactosidase, derived from the fungus Aspergillus niger, is an enzyme that breaks down the fibre usually fermented by bacteria, reducing intestinal gas. Describe how alpha-galactosidase would be produced using A. niger in a continuous fermenter.
20N.3.HL.TZ0.10b: Suggest, with a reason, whether this is a batch or a continuous fermentation.
20N.3.HL.TZ0.10a.ii:
Explain the possible causes of these changes in pH.
18M.3.SL.TZ1.8b:
State two uses for industrially produced citric acid.
19M.3.SL.TZ1.8c: The three species of bacteria are commonly found on skin. Explain why excessive handwashing...
18M.3.HL.TZ1.9a.i: State one fuel that can be produced in this fermenter.
18M.3.HL.TZ1.9a.ii: Outline one variable that must be controlled in an industrial fermenter
18M.3.SL.TZ2.8a.ii: A. aceti is a Gram-negative bacterium. If a Gram staining procedure were carried out on a...
16N.3.SL.TZ0.8c: Suggest reasons for the changes in mass of sugar and citric acid after day 6.
17M.3.SL.TZ1.8a.ii: Suggest reasons based on the data in the graph for increases in biogas production at Svensk...
19M.3.SL.TZ1.8a: Estimate the diameter of the zone of inhibition around the disc containing OPP in the S....
19M.3.HL.TZ1.9a.i: Estimate the diameter of the zone of inhibition of chloramphenicol.
19M.3.SL.TZ2.8a:
Suggest reasons for the use of a batch culture for the first fermentation and a continuous fermenter for the second fermentation.
17M.3.SL.TZ1.8a.i: Biogas production in a fermenter requires a substrate. State another requirement for this...
16N.3.HL.TZ0.9a: Outline the effect of disc 3 on the bacterial lawn.
19N.3.HL.TZ0.10d: Explain how conditions in the fermenters are maintained to maximize penicillin production.
18M.3.HL.TZ1.9b:
Explain factors that affect the rate of activity of microorganisms in fermenters.

Hide related questions

Option B: Biotechnology and bioinformatics » Option B: Biotechnology and bioinformatics (Core topics)

Option B: Biotechnology and bioinformatics